How to use:
1.Enter the four-digit password (default 0000), the green lights. If you enter the wrong password, the red light will be illuminated. Will remind you “please try again”.
2.Clockwise the button, opened the door. Green light for about 10 seconds, there will creak of the door opening. If the door open for more than 10 seconds, the green light is off, and a beep sounds once every 20 seconds. Closed to stop the beeping.
3.The banknote paper money into the mouth, directly into the bill.
Q1:Forgot your password?
A: Remove the battery and re-installed over five minutes later, the password is restored to its original state “0000”.
Q2.Open the back of the switch, why not open the door?
A: If the password box must wait while the voice mode, enter a password every key after the end of the speech input by
pressing a button. Not continuous.
Each time you press a key recommendation, after an interval of one second and then enter.
Q3.Lockbox not automatically sucked bill?
A. Open the safe, with a white tank top gear, with a small screwdriver to gently struck laps.
How to change passwords:
1.Open the box, using the same password before. (The factory setting is 0000) and then open the safe door.
2.Press and hold the button until the green and red lights are flashing.
3.Press the new 4-digit code within 15 seconds, then press # and the light stops flashing.
4.Release the button and close the cabinet intact.
5.In case you forget the password. Remove the battery and then insert the new password is 0000. Reset again.
Batteries Notification(Not included):
Use ordinary 3 AA batteries.
1.Please use a new battery.
2.Do not mix old and new batteries.
3.If you don’t use it for a period of time, remove the batteries.